You are Here: Home > Plating Equipment > Plating Heaters > Angular Heaters
Schloetter Plating Heaters
Angular Immersion Safety Heaters
Angular immersion heaters are suitable for both single and three phase operation. They are equipped with a PVC cable, standard length 1.6m long.
The angular design is ideally suited to heating tanks with low liquid levels as the tube is installed horizontally and the liquid is heated from the bottom of the tank.
Mounting brackets are fitted (standard height 50mm) to the horizontal length of the heater to protect against damaging tank linings.
The angular type heaters consist of a 45mm diameter horizontal heated immersion tube (B dimension), the length of which is depends on the electric output capacity.
The vertical unheated immersion tube (A dimension) is variable and is according to the depth of the tank (minimum depth 200mm).
Single or Three Phase
| Rating Watt |
Length (B Dimmension) mm |
Stainless Steel Product No. |
Titanium Product No. |
|---|---|---|---|
| 630 | 250 | 24153100 | 24153200 |
| 1000 | 300 | 24153100 | 24153200 |
| 1400 | 400 | 24153100 | 24153200 |
| 2000 | 500 | 24153100 | 24153200 |
| 2500 | 600 | 24153100 | 24153200 |
| 3150 | 750 | 24153100 | 24153200 |
| 3500 | 950 | 24153100 | 24153200 |
Minimun A dimmension is 200 mm -
Please specify length required when ordering
Three Phase Only
| Rating Watt |
Length (B Dimmension) mm |
Stainless Steel Product No. |
Titanium Product No. |
|---|---|---|---|
| 4500 | 1150 | 24153100 | 24153200 |
| 5000 | 1400 | 24153100 | 24153200 |
Minimun A dimmension is 200 mm -
Please specify length required when ordering
Specification subject to change without prior notice