You are Here: Home > Plating Equipment > Plating Heaters > Low Level Float Switches
Low Level Float Switches
The problem of keeping levels of liquids constant occurs frequently in surface treatment technology.
Evaporation of the liquid or the removal of liquid by drag-out losses can result in considerable variation of the liquid level, and this can cause damage both to the objects and to heaters, pumps and other devices installed in the baths.
All of these problems can be solved with a float switch.
These are ideal units for the detection of a low solution level with adjustable switching height. They come complete and ready for use including 1.6 metres of cable.
The switches are supplied with an adjustable bracket allowing height adjustment. The MTS float switch has one actuation point which monitors the level of the liquid.
All switches are in a splash proof enclosure, type IP64 and available in PVDF only.
Principle of Operation
A magnet is built into the float switch which actuates a reed relay in the float rod. If the float drops to a lower level point a contact is opened, thus switching off the devices e.g. heaters.
Standard lengths
| Length mm |
PVDF Product No. |
|---|---|
| 150 | 24160200 |
| 200 | 24160100 |
| 300 | 24160000 |
| Other Size | 24160300 |
Spares
| Product No. | Description |
|---|---|
| 24125000 | Mini Head Bracket |
Specification subject to change without prior notice