Z Series Plating Barrels
For the electroplating of small components from a laboratory scale up to a load of 12 Kg
The units consist of a portable frame containing a conventional plating barrel with a variety of dimensions to suit a wide range of component and load types.
Electrical contact is made through danglers sealed into the barrel bearings.
Construction material is durable polypropylene for all of the plastic parts, including the barrel itself and the hanger frames, gear wheels etc.
Perforations can be chosen from plain holes (2mm standard but 1 to 4mm are available) or 0.5 mm slots.
|Motor:||7.2 Nm as standard|
|15 Nm motor is available for all models|
|L x SW
V / Nm
|Z 41/1||1.5||150 x 100||270||140||440||5.0||6-12/7.2|
|Z 41/2||2.0||200 x 100||320||140||440||5.5||6-12/7.2|
|Z 42/1||6.0||250 x 180||400||230||540||7.5||6-12/7.2|
|Z 42/2||7.0||300 x 180||450||230||540||8.0||6-12/7.2|
|Z 42/3||9.0||350 x 180||500||230||540||8.5||6-12/7.2|
|Z 42/4||12.0||450 x 180||600||230||540||8.8||6-12/7.2|
Specification subject to change without prior notice