You are Here: Home > Plating Equipment > Plating Filter Pumps > MC15 Double Filter Units
Schloetter Plating Filter Pumps
MC15 Double Filter Units
The MC15 Double Filter Unit is manufactured in a sturdy polypropylene construction suitable for most plating solutions. It is simple to use, with the following advantages -
- Self-priming pump, provided that the filter chamber is filled with solution at the beginning of filtration.
- Quick fastening / opening lid.
- Very high corrosion resistance of all components.
- The unit is fitted with two chambers incorporating two single 10" or 20" long poly wound cartridges.
Accessories required -
- 2 off inlet / outlet PVC hoses (20 mm or 25 mm inside diameter)
- 1 Only strainer 20 or 25 mm
Optional Extras -
- 1 only pressure gauge
Parallel Chambers
The two chambers are supplied are connected in parallel (the solution passes through both chambers at the same time). Parallel filtration doubles the effective filtration area, enables a higher flow rate and extends the service intervals for less down time and lower servicing costs.
Pumps
The Unit comes with a choice of pumps - the M35 and the M50. The M50 should be chosen where a high flow rate is required. The M35 and M50 pumps are magnetically coupled, centrifugal units, thus helping to avoid any leakages. They are self-priming and are available in single or three phase. The pump body is made of polypropylene and its closed impeller guarantees greater efficiency and silent operation. The impeller is guided by a ceramic shaft.
Technical Data
| M 35 Motor: | 180 watts / 2900 rpm |
| M 50 Motor: | 180 watts / 2900 rpm |
| Connections: | Standard fittings - nozzles (Other connections available) |
| Max Operating Temp: | 85°C |
Filter Unit Part Numbers
| Description | Product No. | Phase | Cartridge | Flow Rate Litres / Hr |
|---|---|---|---|---|
| MC15 / M35 | 251554 | Single | 2 x 10" Parallel | 2500 max |
| MC15 / M35 | 251557 | Three | 2 x 10" Parallel | 2500 max |
| MC15 / M50 | 251572 | Single | 2 x 10" Parallel | 4000 max |
| MC15 / M50 | 251575 | Three | 2 x 10" Parallel | 4000 max |
| MC15 / M35 | 251559 | Single | 2 x 20" Parallel | 2500 max |
| MC15 / M35 | 251561 | Three | 2 x 20" Parallel | 2500 max |
| MC15 / M50 | 251579 | Single | 2 x 20" Parallel | 4000 max |
| MC15 / M50 | 251581 | Three | 2 x 20" Parallel | 4000 max |
Accessories
| Description | Product No. |
|---|---|
| Strainer for M35 (20mm) | 251630 |
| PVC Hoses (pair) for M15 & M35 (20mm) | 251641 |
| Strainer for M50 (25mm) | 251631 |
| PVC Hoses (pair) for M50 (25mm) | 251640 |
| Pressure Gauge | 251670 |
Specification subject to change without prior notice