You are Here: Home > Plating Equipment > Plating Filter Pumps > Filter Media

Cartridges & Filter Media for Plating Filter Pumps

Plating Filter Media

Papers and Cloths

Filter Media Papers and Cloths

Schloetter offer a complete range of media for use with our disc filter units.

Available are polypropylene papers, polypropylene cloths, and activated carbon pads.

 

Description Microns No. in Pack Product No.
Filter Papers
W.S.I. Filter Papers 195-60 10 100 255000
W.S.I. Filter Papers 203-32 10 100 255001
W.S.I. Filter Papers 470-60 10 100 255002
W.S.II. Filter Papers 195-60 20 100 255003
W.S.II. Filter Papers 203-32 20 100 255004
T.O. Filter Papers 195-60 5 100 255005
T.O. Filter Papers 203-32 5 100 255042
Filter Cloths
Polypropylene Filter Cloths 195-60   Single 255011
Polypropylene Filter Cloths 210-32   Single 255012
Polypropylene Filter Cloths 490-60   Single 255013
Polypropylene Filter Cloths 210-60   Single 255060
Polypropylene Filter Cloths 456-100   Single 255061
Carbon Pads
C1 Carbon Pads 195-60   25 255006
C1 Carbon Pads 205-34   25 25007
C1 Carbon Pads 470-60   25 255008
C2 Carbon Pads 456-100   100 255070
Filter Cartridges

Cartridges

Schloetter offer a complete range of cartridges for use with our filter units.

The following are available:

  • Standard Polypropylene Wound
  • Spun Bonded
  • L-Tech Pleated
  • Carbon Impregnated

Standard Poly Propylene Wound Cartridges (Pre-Washed)

The pre-washed polypropylene wound cartridge is made up of a synthetic fibre which is suitable for most plating solutions, especially organic acids / alkalis. Good results are also obtained in organic solvents.

The polypropylene is wound around a poly core in such a way to create hundreds of tapered layers giving excellent depth filtration.

Micron ratings vary from 1 - 200 microns, depending on the contaminant in the liquid, flow rate, etc.

Lengths available: 4" - 40" (please see chart below)
Max operating temperature: 70°C
Size Micron Product No.
4" 5 255101
5" 10 255102
10" 1 255103
10" 3 255104
10" 5 255105
10" 10 255106
10" 20 255108
10" 30 255109
10" 50 255110
20" 1 255111
20" 3 255112
20" 5 255113
20" 10 255114
20" 15 255115
20" 20 255116
20" 25 255150
20" 30 255117
20" 50 255118
30" 1 255119
30" 3 255120
30" 5 255121
30" 10 255122
30" 15 255123
30" 20 255124
30" 30 255125
30 50 255126
40" 10 255130
Carbon Filter Cartridges

Spun Bonded Cartridges

The spun bonded cartridge is made up of a single material polypropylene which is highly resistant to most plating solutions, i.e. no resins, binders or lubricants, anti-static agents or other materials are used during the manufacture.

This coreless, self-supporting cartridge ensures easy disposal by incineration after use.

Spun bonded filters are recommended for use with flow rates in the region of 5 - 25 litres per minute per 10" cartridge length, ensuring maximum life of the filter can be obtained at lower flow rates.

The maximum operating temperature for spun bonded cartridges is 50°C

N.B. Users should ensure compliance with environmental and other regulations relating to the disposal of both the filter and the retained contaminant.

Size Micron Product No.
5" 1 255200
5" 3 255201
5" 5 255202
5" 10 255203
5" 20 255204
5" 50 255205
5" 75 255206
10" 1 255207
10" 3 255208
10" 5 255209
10" 10 255210
10" 20 255211
Size Micron Product No.
10" 50 25512
10" 75 255213
20" 1 255214
20" 3 255215
20" 5 255216
20" 10 255217
20" 20 255218
20" 50 255219
20" 75 255220
30" 1 255221
30" 3 255222
30" 5 225223

L-Tech Cartridges

L-Tech cartridges are designed to maximise the filtration area, being a very large single pleated cartridge. They are made from polypropylene, available in either 10 or 20 micron grade.

The cartridges greatly reduce the down-time in changing filter media (two minutes is typical) as it is only  necessary to change a single item.


Description Micron Product No.
Pleated cartridge Code 13-1001-02 10 255403
Pleated Cartridge Code 13-1001-01 20 255404
L-Tech Filter Cartridge

Carbon Cartridges

Schloetter's filter range includes two types of carbon powdered cartridges.

The carbon purification process is used whereby the liquid / solution to be purified is exposed to activated carbon. The purpose of this is to remove organics such as lubricant oils.

N.B. To adequately remove powdered carbon from solutions, 1 to 5 micron filtration is recommended.

Carbon reaction time is much faster with powdered carbon than with granular carbon.

Description Size Product No.
Pre-washed activated carbon granules (113 gms) 10" 255401
Pre-washed activated carbon granules (225 gms) 20" 255402

Specification subject to change without prior notice

More Filter Pumps

Follow us on:  

 

Schloetter Co Ltd

Abbey Works
New Road
Pershore
Worcs, UK
WR10 1BY

Tel:      +44(0)1386 552331

Web:     

E-mail:  info@schloetter.co.uk

Registered in England 947371

VAT No. GB 274 7177 31

accreditation logos