You are Here: Home > Paints & Lacquers > URACRYL
The URACRYL Series – perfect paints for plastics and metals
Solvent based polyurethane
| Curing | Air dried for 2hrs @ RT or 30 mins @ 80°C |
| Substrates | General plastics e.g. ABS & Polycarbonate and most non-ferrous metals |
| Scratch resistance | Good |
| Main uses | Colouring plastics & decorative finishes e.g. bathroom fittings, plastic enclosures, mouldings & bottle tops |
URACRYL SC 230 Series
- Good adhesion to a range of plastics
- Good adhesion to ferrous and non-ferrous metals
- 2 pack syste
- Interior or exterior use dependent on hardener used
- Pot life greater than 4 hours
URACRYL SC 240 Series
- Good adhesion to a range of plastics
- Good adhesion to ferrous and non-ferrous metals
- 2 pack system
- Increased chemical & water resistance compared with SC 230 series
- Interior or exterior use dependent on hardener used