You are Here: Home > Paints & Lacquers > AQUACRYL
The AQUACRYL Series – perfect paints for plastics
Water based acrylic paint
| Curing | Air dried for 2hrs @ RT or 30 mins @ 80°C |
| Substrates | General plastics e.g. ABS & Polycarbonate |
| Scratch resistance | Good |
| Main uses | Colouring plastics & decorative finishes e.g. plastic enclosures, mouldings & bottle tops |
AQUACRYL SCW330 Series
- Excellent adhesion to a range of plastics including ABS, PS and PPO
- Single pack drying coating
- Good scratch resistance
- Easily applied by manual or automatic spray equipment
AQUACRYL SCW340 Series
- Good adhesion to a range of plastics including ABS, PC and HIPS
- Single pack air drying coating
- Excellent scratch resistance
- Fast drying
- Good chemical resistance to cosmetics and alcohol
- Low VOC – typically less than 150g/l
- Easily applied by manual or automatic spray equipment
AQUACRYL SCW370 Series
- Good adhesion to a range of plastics
- Single pack air drying coating
- Excellent scratch resistance
- Fast Drying
- Excellent chemical resistance to cosmetics and alcohol
- Easily applied by manual spray equipment
AQUACRYL SCW380 Series
- Water based paint system that has been developed to have
exceptionally low VOC
- ranging from 10 - 100 g/l VOC dependent on the specific finish required.
- Single pack air-drying, acrylic paint system for plastic and metal components such as enclosures, mouldings and bottle tops.
- The paint can be blended to match any colour or finish
ranging from full gloss finishes through to matt.
- Metallic and pearlescent finishes are also available
- The coating has excellent scratch and chemical resistance and is suitable for both cosmetic and alcohol industries.