Schloetter Plating Processes
  
Electroless Nickel Processes 

Electroless Nickel SH840

An electroless nickel strike to be used prior to subsequent plating on delicate substrates. This will plate a uniform pore-free, adherent deposit on properly prepared substrates.

Additionally, its high tolerance for zinc makes it long lived and economical. This barrier layer will serve to extend the life of subsequent plating solutions by minimising zinc drag in.

 

Electroless Nickel Slotonip 1850

A Cadmium and Lead free, medium phosphorus electroless nickel process specifically formulated to provide an easy to operate, high-speed electroless nickel bath.

This process will produce a bright, uniform deposit with 6 - 9% phosphorus on ferrous, non-ferrous and non-conducting substrates such as ceramics and plastics.

Slotonip 1850 has an advanced stabiliser system, which allows excellent stability over the long life of the electroless nickel solution.

 

Electroless Nickel Slotonip 2010
A medium phosphorus electroless nickel process specifically formulated to provide an easy to operate, high speed electroless nickel bath.

This process will produce a fully bright, uniform deposit with 6 - 9% phosphorus on ferrous, non-ferrous and non-conducting substrates such as ceramics and plastics.

 

Electroless Nickel Slotonip 2110

A medium phosphorus electroless nickel process specifically formulated to provide an easy to operate, high speed electroless nickel bath.

This process will produce a semi-bright, uniform deposit with 6 - 9% phosphorus on ferrous, non-ferrous and non-conducting substrates such as ceramics and plastics.

 

Electroless Nickel Slotonip 70 A

A medium phosphorus (9 - 10 %) process producing semi-bright to bright deposits which are free of lead and cadmium.

The solution is easy to operate and maintain and has excellent stability. The pH is controlled with ammonia and the deposition rate for a new solution is approximately 18 - 22 µm/hour.

 

Electroless Nickel Slotonip 70 K

A medium phosphorus (9 - 10 %) process producing semi-bright to bright deposits which are free of lead and cadmium

The solution is easy to operate and maintain and has excellent stability. It is free of ammonia and the deposition rate for a new solution is approximately 18 - 22 µm/hour.

Electroless Nickel Slotonip 90
A high phosphorus, heavy metal-free process giving deposits that are bright or semi-bright and contain 10.5 – 11.5% phosphorus.

The process is used if a high corrosion resistant finish is required.

Electroless Nickel Slotonip 90 is easy to operate, runs virtually problem free and is very stable.

 

Electroless Nickel Nibodur GJN
A mildly acidic process for the deposition of nickel-boron coatings on metals and non-conductors. The semi-bright deposits contain between 1 and 2 % Boron.

The system is stable and easy to maintain and can have a long life if correctly operated. Deposition speed is around 7 - 10 µm per hour;

 
  
Electroless Nickel Ancillaries 

Activator PDI 10

An ionic palladium activator to initialise electroless deposition on non-conductors.

 

Alumenate Process

ALUMENATE utilises a new generation of processes for the pretreatment and plating of aluminium and aluminium alloys. The sequence demonstrates many advantages and benefits over the traditional chemical formulations currently used.

The process steps are:-

  • Non-etch cleaner

    • Can Safely Use Long immersion times

  • Mild and controllable etching

    • Choice of Alkaline or acid

    • Etch rates from 0.05 µm/min

  • Nitric-free desmut

    • No NOx fumes

    • Less aggressive on substrate

  • Cyanide-free Zincate

    • Safer

    • Ultra thin zinc conversion coating

Page last updated: 21/04/08

     Top


Plating Technology

Schloetter Company Ltd.
Abbey Works
New Road
Pershore
Worcestershire WR10 1BY
UK

Registered in England 947371

VAT No. GB 274 7177 31

Tel: 01386 552331
Fax: 01386 561005
Email:  info@schloetter.co.uk

Home Page

Best Viewed @ at least 1024x768 with MSIE 5+