A Silver Strike solution is always recommended prior to silver deposition to promote excellent adhesion and prolong the life of the main plating solution.

Bright Silver Altix process produces light, bright, haze-free deposits.

Inclusion of an antimony brightener gives enhanced and controllable hardness over a wide range of deposit thicknesses.

The process is ideally suited to decorative, technical and heavy silver plating in both rack and barrel systems.

Best results are achieved when plating onto brass, copper or German silver.

The Elfit deposit has a conductivity equal to pure silver and is widely used throughout the world for RFI transmission applications.

Arguna ET produces semi-bright silver deposits on polished surfaces. On matt surfaces the finish is smooth and fine grained. The hardness of the deposit can be varied from 80 HV to 150 HV.

Arguna 625 is a high speed silver plating electrolyte containing no free cyanide. The plating solution does not produce an immersion deposit and produces semi-bright coatings with very good soldering and bonding properties.

A solvent-free electrolytic chromate silver antitarnish. It can be used in rack, barrel or reel to reel machines and is equally suited to both decorative and functional deposits.

Sil-Aft is an electrolytic system operated anodically for the protection of silver and silver alloys against tarnishing.

Specified by a major high street retailer, Sil-Aft gives protection to "point of sale", even in the more extreme climates.

Specially developed for use in Elfit to extend the life of the silver solution.

Available as 54% or 80% silver

A high specification product for general use in maintenance and make-up.

Dogbone silver anodes are thickened at the high current density portions of the cross section and maintain a more consistent anode current density throughout the life of the anodes.

99.97% fine silver

Sheet anodes are available to special order.