Schloetter Plating Processes
  
Copper Processes 

Cyanide Copper Strike

Used for the pre-plating of steel, zinc-based diecastings, aluminium, lead or its alloys, the cyanide copper strike is a hydroxide-free electrolyte.

It gives a fine grained, matt to semi-bright deposit up to a maximum thickness of 5 µm.

 

Cyanide Copper Slotocoup CC10

This cyanide based copper electrolyte produces bright, smooth and ductile deposits.

The throwing and covering power are excellent; the process is very suitable for the plating of profiled parts.

As it is hydroxide free, it is particularly suitable for the copper plating of zinc-based diecastings. It is suitable for both rack and barrel applications.

 

Bright Copper TB 10
 
A decorative acid copper process giving a mirror bright, highly levelled deposit. Levelling performance is maintained even at low current densities. This sulphuric acid based electrolyte has a stable additive system and wide operating parameters.

Operating temperature of the bath is 20 - 25°C
(22°C) optimum and the current density varies between 2 and 7 A/dm². Deposition rate is 0.88 µm / minute at 4 A/dm²

Acid Copper Slotocoup PC81

A key factor in the success of Slotocoup PC81 acid copper has been its suitability for the deposition of thick and very ductile deposits.

Other advantages include its ability to withstand the most demanding thermal cycle tests and to operate over a wide range of current densities. This process is particularly suitable for electroforming applications.

Using a single additive system, which produces no detrimental breakdown products, the bath remains stable after being left idle for long periods. Deposition rate is approximately 0.89 µm/minute at 4 amps/dm².

 
Copper Ancillaries 

Copper Sulphate Salt

This pure, anti-caking, additive-free salt, is available for the trouble free manufacture and maintenance of all copper sulphate plating solutions.

 

Copper Sulphate 300 g/l

This purified liquid concentrate provides trouble free manufacture and maintenance of all copper sulphate plating solutions.

 

Copper Concentrate FC

A 32% w/w pure concentrate of copper methane sulphonate.

 

Copper Fluoborate 50%

A high grade 50% concentrate of copper fluoborate.

 

Copper Anodes OFHC

Developed for use in cyanide solutions.

 

Copper Anodes Phosphorous De-oxidised
 
Developed for use with copper sulphate plating solutions   PDO Anodes

Sulphuric Acid Pure 1.84

Pure sulphuric acid, suitable for the maintenance of copper, nickel and a variety of processes

 

Page last updated: 18/03/08

   Top


Plating Technology

Schloetter Company Ltd.
Abbey Works
New Road
Pershore
Worcestershire WR10 1BY
UK

Registered in England 947371

VAT No. GB 274 7177 31

Tel: 01386 552331
Fax: 01386 561005
Email:  info@schloetter.co.uk

Home Page

Best Viewed @ at least 1024x768 with MSIE 5+